Extractors
Developers
Renowed all over the world, the coveted PAJOT
automatic hammers offer highly effective piling capacity
and very simple and economical maintenance !
They can drive sheet pile, tubes, H beam, etc...
PZ 130 Extractor
PZ 130 has been especially designed for the extraction of safety barrier
posts. Due to its high number of blows of approx. 950 n/min it is extremely careful to cranes at maximum extraction speed.
The closed construction type assures safe handling as well as high weathering resistance.
This extractor is fitted with special renforced PAJOT clamp
| Specifications | |
| Total weight with clamp | 120 kg |
| Blow rate : | 950 CPM |
| Energie by blow: | 33 kg/m |
| Pre-tension : | 1 à 3 T |
| Air flow required : | 3,5 m3/min |
| Hoses diameter : | 25 mm |
| Total lenght with clamp : | 50 mm |
PZ 4 et PZ 5 Exctractors
When the vibro can’t extract a profil the PZ4 and 5 are the ultimate solution.
(Only in rental or in used equipment)
| Specifications | PZ 4 |
PZ 5 |
| Total weight with clamp | 2 500 kg |
4 600 kg |
| Ram weight | 720 kg |
1 480 kg |
| Stroke (max.) | 0 - 230 mm |
150 - 230 mm |
| Blow rate/m | 150 - 190 |
160 - 190 |
| Traction recommended min/max. | 25 T / 40 T |
25 T/ 40 T |
| Air flow required | 10 m3/minute |
20 à 30 m3/minute |
| Hoses diameter | 40 mm |
50 mm |
| Body diameter | 575 mm |
730 mm |
| Total lenght with clamp | 3 200 mm |
4 200 mm |
We reserve the right to amend specification at any time |
||